sensor_ID = 1
// Tx config
TX_PULSE_on_time_before_reading = 1029
TX_PULSE_off_time_after_reading = 19450
// input stage
Highgain = False
Mediumgain = False
Lowgain = True
Autogain = False
Highgain_0NTU = 193
Highgain_TOP_RAW = 1165
Highgain_SPN = 10
Highgain_OFFSET = 193
Highgain_Multiplier = 10.288
Mediumgain_0NTU = 169
Mediumgain_TOP_RAW = 3199
Mediumgain_SPN = 400
Mediumgain_OFFSET = 169
Mediumgain_Multiplier = 132
Lowgain_0NTU = 168
Lowgain_TOP_RAW = 3151
Lowgain_SPN = 3000
Lowgain_OFFSET = 168
Lowgain_Multiplier = 1005.7
Sample_Hold_ON/OFF = True
Sample_Hold_Pulse_Width = 500
Sample_Hold_Pulse_appear_delay_before_TX = 11
RAW_AVG_Length = 400
Calculate_NTU_Every_number_of_Samples = 50
Slew_Rate_On-OFF = True
Slew_Rate = 8
Slew_Rate_mid = 10
Slew_Rate_low = 3
Slew_Rate_high_trg = 400
Slew_Rate_mid_trg = 800
Slew_Rate_low_trg = 1500
// Input Temperature Compensation
// NTU  Out
Output_Update_After_Number_Of_Readings = 200
Freeflow Digital = True
Analogue_Out_V = True
Polled_Digital = False
sdi_12 = False
Digital_Out_MODBUS = False
Freeflow_polledmode_comtype = RS422
Freeflow_data_interval = 1
Freeflow_data_Communication_settings = 9600,8,N,1
Freeflow_data_Output_Sentence = #,Sensor_ID,NTU
Freeflow_data_Wiping_Options = 60
polled_data_acquisition_period = 2
polled_data_Communication_settings = 9600,8,N,1
polled_data_Read_Output_Sentence = #,Sensor_ID,NTU,Temperature
sdi12_Address = 0
sdi12_acquisition_period = 1
// Voltage output stage
Vout_bottom_value = 763
Vout_NTU_ROW_DATA_Multiplier = 000201
Vout_NTU_ROW_DATA_Divider = 100000
// Internal sensors
Input_Temperature_OFFSET = -1250
Input_Temperature_Gain = 0.03
Out_Temperature_OFFSET = -1250
Out_Temperature_Gain = 0.03
Analog_(-)_Voltage_OFFSET = 1
Analog_(-)_Voltage_Gain = 1
Analog_(+)_Voltage_OFFSET = 1
Analog_(+)_Voltage_Gain = 1
Sensors_update_rate = 1000
// Wiper settings
Wiping_mode = Single_direction_Wipe
Wipe_On_PowerUp = True
Wipe_OnPowerUp_Vout = 793
Wipe_Timeout = 30
auto_analoge_power_reset_enable = True
auto_analoge_power_reset_time_period = 3600
0ntu_tracking = False
// Input Stage Temperature Compensation
Enable_Linearity_Compensation = True
Enable_Temperature_Compensation = False
Linearization_LOW = 16
Linearization_LOW_Step = 1
Linearization_MID = 400
Linearization_MID_Step = 20
Linearization_HI = 3000
Linearization_HI_Step = 59
Input_Stage_Temp_Comp_HI_RANGE_Table_length = 10
Input_Stage_Temp_Comp_HI_RANGE_row_0=0,1.001
Input_Stage_Temp_Comp_HI_RANGE_row_1=5,1.001
Input_Stage_Temp_Comp_HI_RANGE_row_2=10,1.001
Input_Stage_Temp_Comp_HI_RANGE_row_3=15,1.001
Input_Stage_Temp_Comp_HI_RANGE_row_4=20,1.001
Input_Stage_Temp_Comp_HI_RANGE_row_5=25,1.001
Input_Stage_Temp_Comp_HI_RANGE_row_6=30,1.001
Input_Stage_Temp_Comp_HI_RANGE_row_7=35,1.001
Input_Stage_Temp_Comp_HI_RANGE_row_8=40,1.001
Input_Stage_Temp_Comp_HI